What kind of oil for a vibrator compactor?

Every piece of equipment requires proper operation. This includes oil changes. We draw attention to how to take care of a cube compactor and which oil from the available variants on the market to choose. Rules for operating a cube compactor. Any work with a cube compactor requires starting with checking the oil level in the unit's engine. Depending on what condition the compactor is in, the oil can be topped up or the excess poured off to a marked amount. Often recommended for all kinds of compactors is 15W40 oil from brands such as Shell, Castrol, Aral or Mobil. What's more, changing the oil in the machine is required at least once every six months, and even preferably every 500 working hours. It is important to remember that the change should be done when the engine of the compactor is warm. If there is not enough oil, it should, of course, be refilled. However, this must not be done while the compactor is in use. It is best to do this during longer breaks, securing the fuel supply valve to the machine.

Other forms of operating a paving compactor are:

• checking the engine and vibrator for any leaks,
• tightening the wires,
• clamps and bolts,
• checking the condition of the pads (vibration isolators),
• checking the alignment of the belt transmission wheels,
• checking the tension of the V-belt (after 50 hours of operation),
• check air filter, oil filter

Such inspection should be done preferably before each work, this will allow to check the condition of the machine. After checking, the machine is ready to work. In the event that the compactor is used for the first time, it is best to let the engine run at low speed for a period of 10 hours. This is for the purpose of running-in. After another 10 hours, it is a good idea to change the oil. Under no circumstances should the device be used contrary to the instructions in the manual.

When working with a compactor, it is forbidden to use the equipment half-speed. If this is not done, it will result in the introduction of too much resonant vibration to this prohibition results in the introduction of large resonant vibrations to the components of the compactor. As a result, this can lead to damage to the machine. And even cause injury to the machine operator. What else you must not do when using the machine is to run the engine in a situation where the air filter is missing. This can lead to premature wear and even damage. It is important to remember that when using a compactor for paving stones or other pavement, you need to install an elastomer on the compactor plate before starting.

Time is also of the essence. Especially because of the highly vibratory nature that the compactor has. Therefore, the operating time of the compactor should not exceed 4 hours. Also necessary for this work are protective gloves and special headphones that effectively muffle noise. Especially sounds above 11 dBA. In addition, untrained people should not be allowed to do this work. In terms of oil, you should pour between 100 and 350 ml, depending on the model.

What oil for a particular compactor vibrator?

There are many oils on the market specialized in terms of composition and consistency for the exploration of machines in the type of cube compactors.

Some of the common choices are:

• Motul Multi ATF for vibrator gear - compactors are best chosen for it for specialized construction machinery, but also for garden equipment and others.
• TERESSTIC T32 - is a high-end oil, it was developed on the basis of mineral oils. It is best used for both central and spot lubrication, and is available in two variants: a 1 liter canister and a 5 liter canister in a convenient oiler for spot lubrication
• ORLEN TRANSOL 320 used for workers' and industrial machinery, it is obtained from selectively refined mineral oils, which contain lead-free additives to improve lubricating properties, as well as a package of additives with anti-corrosive properties.

As a result, they increase resistance to oxidation. They are also anti-foaming or demulsifying. What characterizes many oils available on the market is primarily that - they protect individual parts of the machine from excessive mechanical wear during their use, often many hours. In addition, they support machines against corrosion, especially those structural elements of gears made of steel and metals. What's more, oils designed for compactor-type machines, thanks to their high thermo-oxidative stability, allow very long and intensive operation, especially at elevated temperatures without losing their properties. They also support against chemical interaction and oxidation of components. The anti-foaming and demulsifying properties that oils have above all in their application counteract the lubricating properties of the oil used. As a result, a permanent foam and oil-water emulsion is formed. This is why equipment such as compactors for paving stones or other surfaces are so long-lasting in operation.