
-
-
Concrete
-
- Concreting
- Concrete Vibrators
- Complete 230 V Mechanical Vibrators
- Vibrator Heads
- Vibrator Shafts
- Vibrator Motors
- Concrete Vibrators 42 V | 200 Hz
- Mechanical Vibrators 230 V
- 42 V | 200 Hz Head and Shaft
- 230 V Concrete Vibrators
- Vibrators With Built-In 230 V | 200 Hz Converter
- 42 V | 200 Hz Converters
- Combustion Vibrators
- Pneumatic Vibrators
- External Vibrators
- Power Trowels
- Vibratory Screeds
- Concrete Hand Tools
- Concrete Vibrators
-
-
-
-
-
- Walk-Behind Combustion Power Trowels
-
-
-
Heating and cooling
-
Generators
-
Earthworks
-
Industrial vacuums
-
Finishing
-
Pumps
-
Measurement
-
BLOG & Tips
-
Promotions
Kategorie 16 kategorii
Kategorie
-
- Levels and Measurements
- Soil Compactors
- Tamping Rammers - Jumping Jacks
- Single Direction Vibratory Plates
- Reversible Vibratory Plates
- Rollers
- 100 kg Soil Compactors
- 200 kg Soil Compactors
- 300 kg Soil Compactors
- 400 kg Soil Compactors
- 500 kg Soil Compactors
- 600 kg Soil Compactors
- 700 kg Soil Compactors
- 800 kg Soil Compactors
- Wacker Neuson Compactors
- Accessories for Compactors
- Bomag Compactors
- Altrad Belle Compactors
- Paver Compactors
- Swepac Compactors
- Power Generators
- Concreting
- Concrete Vibrators
- Complete 230 V Mechanical Vibrators
- Vibrator Heads
- Vibrator Shafts
- Vibrator Motors
- Concrete Vibrators 42 V | 200 Hz
- Mechanical Vibrators 230 V
- 42 V | 200 Hz Head and Shaft
- 230 V Concrete Vibrators
- Vibrators With Built-In 230 V | 200 Hz Converter
- 42 V | 200 Hz Converters
- Combustion Vibrators
- Pneumatic Vibrators
- External Vibrators
- Vibratory Screeds
- Power Trowels
- Concrete Hand Tools
- Concrete Vibrators
- Pumps and Motor Pumps
- Cutting, Drilling and Grinding
- Heating and Cooling
- Wood Table Saws
- Painting and Plastering
- Combustion Engines
- Washing and Vacuuming
- Cement Mixers
- Paving Tools
- Wheelbarrows and Track Dumpers
- Demolition and Hammers
- Sales
- Levels and Measurements
Brak kategorii pasujących do wyszukiwania.
Underfloor Heating Scarifiers
Hemming HE-120 Manual Scarifier 230v FOR Grooves For Underfloor Heating
19599zł16,399.00 tax incl. 13 332,52 zł tax excl.View technical data Zobacz szczegóły
- Weight: 74 kg
- Engine: 2,2 kW 230 V
- Min. distance from the wall: 10 cm
- Max. milling depth: 25 mm
- Mounting: 22,2 mm
Hemming HE-120 Manual Scarifier 400v FOR Grooves For Underfloor Heating
19604zł17,399.99 tax incl. 14 146,33 zł tax excl.View technical data Zobacz szczegóły
- Weight: 74 kg
- Engine: 4 kW 400 V
- Min. distance from the wall: 10 cm
- Max. milling depth: 25 mm
- Mounting: 22,2 mm
Toolsa THM130 M Floor Heating Scarifier, Manual Feed (4 Kw | 400 V)
THM130M400zł8,608.77 tax incl. 6 999,00 zł tax excl.View technical data Zobacz szczegóły
- Weight: 77 kg
- Engine type: Elektryczny
- Frequency: 50 Hz
- Voltage: 400 V
- Min. distance from the wall: ok. 10 cm
Hemming HE-120 Automatic 400V Scarifier For Grooves For Underfloor Heating.
19605zł39,799.00 tax incl. 32 356,91 zł tax excl.View technical data Zobacz szczegóły
- Weight: 95 kg
- Engine: 4 kW 400 V
- Min. distance from the wall: 12 cm
- Max. milling depth: 25 mm
- Mounting: 22,2 mm
Groove milling machine for underfloor heating Hemming HE-120 Manual 230V with Milling Machine
0000000022725zł19,188.00 tax incl. 15 600,00 zł tax excl.No technical data available Zobacz szczegóły
Spit D90 Heating Groove Scarifier
10003zł5,904.00 tax incl. 4 800,00 zł tax excl.View technical data Zobacz szczegóły
- Weight: 6,5 kg
- Engine: 2,5 kW 230 V
- Max. milling depth: 45 mm
- Cutter diameter: 150 mm
- Idle speed: 6600 obr./min
RH 403-S Heating Groove Scarifier
1000810zł6,642.00 tax incl. 5 400,00 zł tax excl.View technical data Zobacz szczegóły
- Weight: 7,1 kg
- Engine: 2,3 kW / 230 V
- Cutting depth: Regulowana 12-45 mm
- Max. milling depth: 25 mm
- Mounting: 22,2 mm
Hemming HE-120 Automatic 230V Scarifier For Grooves For Underfloor Heating.
19601zł35,889.99 tax incl. 29 178,85 zł tax excl.View technical data Zobacz szczegóły
- Weight: 95 kg
- Engine: 2,2 kW 230 V
- Min. distance from the wall: 12 cm
- Max. milling depth: 25 mm
- Mounting: 22,2 mm
Hemming HE 120 Hard Screed/concrete Cutter
19725zł676.50 tax incl. 550,00 zł tax excl.View technical data Zobacz szczegóły
- Milling width: 17,3 mm
- Cutter diameter: D125 mm
Underfloor heating scarifiers cut precise grooves for heating pipes in concrete floors, cement screeds and anhydrite toppings. A disc cutter head, 120–150 mm in diameter, opens a channel around 20–25 mm deep, so the pipe is buried inside the existing slab and the finished floor level stays where it is — which makes groove cutting the standard way of retrofitting underfloor heating in a renovated building.
NORWIT.PL supplies manual-feed groove cutters and self-propelled automatic machines in 230 V and 400 V versions, together with replacement cutter heads for hard screed and concrete. The machines have a dust port for a vacuum cleaner for scarifiers, adjustable groove depth and width, and a stop that limits how close the head runs to the wall. How to match the machine, what groove parameters to expect and where manual feed differs from automatic feed are explained below.
What an underfloor heating scarifier does
An underfloor heating scarifier opens a narrow channel in a finished floor so that a PE-RT or PEX pipe of 12–16 mm can be laid inside the existing slab. No new screed is poured, so the floor gains a few millimetres instead of the 6–8 cm a fresh topping would add — thresholds and ceiling height stay as they were.
The machine rolls on wheels while the disc cutter sinks into the screed to a preset depth along the marked loop. Depth is set once and repeated over the whole loop, which matters when a room needs tens of metres of groove.
Manual feed or automatic feed
Working speed depends on how the machine moves. With manual feed the operator pushes the unit and sets the pace, which helps on the curves of a loop and in tight rooms. Automatic models drive themselves at a constant speed, so groove depth stays even over the whole length. Both are available, mainly from Hemming Technik and Toolsa, in 230 V and 400 V versions.
| Feature | Manual feed | Automatic |
|---|---|---|
| Guidance | hand-guided on a wheeled chassis | self-propelled, constant speed |
| Cutter diameter | usually 120–130 mm | usually 120–130 mm |
| Power supply | 230 V or 400 V | 230 V or 400 V |
| Substrate | cement screed, anhydrite, concrete | screed and concrete, continuous duty |
| Typical use | flat refurbishment, loop curves | large areas, repeatable depth |
Groove accuracy and what to check before buying
Accuracy is the point here: the channel has to be deep enough for the pipe and no deeper, or the slab loses section for nothing. Four parameters decide the choice — maximum cutting depth, typically around 25 mm; depth and width adjustment for a 12, 14 or 16 mm pipe; minimum working distance from a wall, of the order of 10–15 cm; and the dust port feeding a vacuum cleaner for scarifiers.
Cutter heads are a separate running cost: they are matched to the machine model, groove width (16 or 17.3 mm) and screed hardness; spares are listed under scarifier accessories.
Groove cutting versus working the whole floor
A groove cutter works on a line, removing material only along the marked route. When a whole surface has to come down, the right tool is a drum machine from the floor scarifiers range, with a wider overview in concrete scarifiers. Vinyl, carpet and tiles come off with floor scrapers, a newly poured layer is compacted with vibratory screeds and finished with power trowels.
Underfloor heating scarifiers compared
Machines in this category compared using the data on their product pages. The wheeled Hemming HE-120 and Toolsa THM130 M cut a 16 or 17.3 mm groove, while the handheld Spit D90 and RH 403-S weigh 6.5–7.1 kg and use a 150 mm cutter. Replacement cutters matched to each machine are listed on its product page under accessories. The groove-cutting process step by step is described in our guide to cutting grooves for underfloor heating.
| Model | Feed | Power supply | Weight | Cutter diameter | Max. depth | Min. distance from wall | Output |
|---|---|---|---|---|---|---|---|
| Spit D90 | handheld (no chassis) | 230 V, 2.5 kW | 6.5 kg | 150 mm | 45 mm | – | – |
| RH 403-S | handheld (no chassis) | 230 V, 2.3 kW | 7.1 kg | 150 mm | 25 mm | – | – |
| Hemming HE-120 manual 230V | manual | 230 V, 2.2 kW | 74 kg | 120 mm | 25 mm | 10 cm | approx. 100 m² / 8 h |
| Hemming HE-120 manual 400V | manual | 400 V, 4 kW | 74 kg | 120 mm | 25 mm | 10 cm | approx. 100 m² / 8 h |
| Hemming HE-120 automatic 230V | automatic | 230 V, 2.2 kW | 95 kg | 120 mm | 25 mm | 12 cm | approx. 100 m² / 8 h |
| Hemming HE-120 automatic 400V | automatic | 400 V, 4 kW | 95 kg | 120 mm | 25 mm | 12 cm | approx. 100 m² / 8 h |
| Toolsa THM130 M | manual, 0.44 kW drive motor | 400 V, 4 kW | 77 kg | 130 mm | 25 mm | approx. 10 cm | – |
Underfloor heating scarifiers — frequently asked questions
When does buying a groove cutter beat renting one?
Whether buying pays off depends on running metres of groove per month, the daily rental rate, transport and cutter wear, so it is best calculated on your own figures rather than a general threshold. Manual-feed machines in 230 V and 400 V are clearly cheaper than automatic ones, while automatic machines hold a constant 20–25 mm groove depth over long loops. For a single refurbishment rental is usually enough; with regular jobs, compare the annual rental cost with the purchase price on the machine page.
How deep should the groove for an underfloor heating pipe be?
Groove depth follows the pipe diameter plus the repair mortar covering it. For 12–16 mm pipe a typical channel is 20–25 mm deep and about as wide, and the wheeled machines here cut to roughly 25 mm maximum (the handheld Spit D90 up to 45 mm). The minimum screed thickness and the mortar cover above the pipe are set by the heating system manufacturer and the designer — before cutting, the actual screed thickness and condition are checked, e.g. with a test core.
Does groove cutting weaken the screed?
Cutting always reduces the screed section at the groove: a 20–25 mm channel in a 50–65 mm screed removes roughly 30 to 50 percent of the thickness there, while material between loops, usually 10–20 cm apart, stays intact. Whether a given floor can take it depends on its thickness, strength and load, so the decision is made by the contractor or designer after assessing the substrate. Grooves should run parallel and be refilled with mortar at least as strong as the screed. A 120–130 mm cutter enters along an arc, leaving smooth channel edges.
Which vacuum cleaner should be connected to a groove cutter?
Cutting screed and concrete calls for an industrial vacuum in dust class M, with filtration of at least 99.9% and filter cleaning during operation. Screed dust contains crystalline silica, and a workshop vacuum under 200 m³/h clogs within minutes. A practical match is a 1.4–3 kW unit with a 50 mm hose and a 30–75 litre container, plugged into the machine dust port.













