
-
-
Concrete
-
- Concreting
- Concrete Vibrators
- Complete 230 V Mechanical Vibrators
- Vibrator Heads
- Vibrator Shafts
- Vibrator Motors
- Concrete Vibrators 42 V | 200 Hz
- Mechanical Vibrators 230 V
- 42 V | 200 Hz Head and Shaft
- 230 V Concrete Vibrators
- Vibrators With Built-In 230 V | 200 Hz Converter
- 42 V | 200 Hz Converters
- Combustion Vibrators
- Pneumatic Vibrators
- External Vibrators
- Power Trowels
- Vibratory Screeds
- Concrete Hand Tools
- Concrete Vibrators
-
-
-
-
-
- Walk-Behind Combustion Power Trowels
-
-
-
Heating and cooling
-
Generators
-
Earthworks
-
Industrial vacuums
-
Finishing
-
Pumps
-
Measurement
-
BLOG & Tips
-
Promotions
Kategorie 16 kategorii
Kategorie
-
- Levels and Measurements
- Soil Compactors
- Tamping Rammers - Jumping Jacks
- Single Direction Vibratory Plates
- Reversible Vibratory Plates
- Rollers
- 100 kg Soil Compactors
- 200 kg Soil Compactors
- 300 kg Soil Compactors
- 400 kg Soil Compactors
- 500 kg Soil Compactors
- 600 kg Soil Compactors
- 700 kg Soil Compactors
- 800 kg Soil Compactors
- Wacker Neuson Compactors
- Accessories for Compactors
- Bomag Compactors
- Altrad Belle Compactors
- Paver Compactors
- Swepac Compactors
- Power Generators
- Concreting
- Concrete Vibrators
- Complete 230 V Mechanical Vibrators
- Vibrator Heads
- Vibrator Shafts
- Vibrator Motors
- Concrete Vibrators 42 V | 200 Hz
- Mechanical Vibrators 230 V
- 42 V | 200 Hz Head and Shaft
- 230 V Concrete Vibrators
- Vibrators With Built-In 230 V | 200 Hz Converter
- 42 V | 200 Hz Converters
- Combustion Vibrators
- Pneumatic Vibrators
- External Vibrators
- Vibratory Screeds
- Power Trowels
- Concrete Hand Tools
- Concrete Vibrators
- Pumps and Motor Pumps
- Cutting, Drilling and Grinding
- Heating and Cooling
- Wood Table Saws
- Painting and Plastering
- Combustion Engines
- Washing and Vacuuming
- Cement Mixers
- Paving Tools
- Wheelbarrows and Track Dumpers
- Demolition and Hammers
- Sales
- Levels and Measurements
Brak kategorii pasujących do wyszukiwania.
Hydraulic Demolition Hammers
Altrad Belle BHB 27X Hydraulic Hammer
BHB27XSzł8,486.58 tax incl. 6 899,66 zł tax excl.View technical data Zobacz szczegóły
- Weight: 30 kg
- Number of strokes: 1300/min
- Flow: 20 l/min
- Energia udaru: 85 J
Altrad Belle BHB 12 Hydraulic Hammer
BHB12Szł6,667.31 tax incl. 5 420,58 zł tax excl.View technical data Zobacz szczegóły
- Weight: 14 kg
- Number of strokes: 2400/min
- Flow: 20 l/min
- Energia udaru: 25 J
Altrad Belle BHB 19 Hydraulic Hammer
BHB19Szł8,075.76 tax incl. 6 565,66 zł tax excl.View technical data Zobacz szczegóły
- Weight: 19 kg
- Number of strokes: 1600/min
- Flow: 20 l/min
- Energia udaru: 65 J
Altrad Belle BHB 23 Hydraulic Hammer
BHB23Szł8,275.67 tax incl. 6 728,19 zł tax excl.View technical data Zobacz szczegóły
- Weight: 23 kg
- Number of strokes: 1600/min
- Flow: 20 l/min
- Energia udaru: 65 J
Altrad Belle BHB 25 Hydraulic Hammer
BHB25Szł8,386.63 tax incl. 6 818,40 zł tax excl.View technical data Zobacz szczegóły
- Weight: 25 kg
- Number of strokes: 1300/min
- Flow: 20 l/min
- Energia udaru: 85 J
Altrad Belle BHB 25X Hydraulic Hammer
BHB25XSzł8,487.59 tax incl. 6 900,48 zł tax excl.View technical data Zobacz szczegóły
- Weight: 25 kg
- Number of strokes: 1600/min
- Flow: 20 l/min
- Energia udaru: 55 J
Altrad Belle BHB 27 Hydraulic Hammer
BHB27Szł8,496.00 tax incl. 6 907,32 zł tax excl.View technical data Zobacz szczegóły
- Weight: 27 kg
- Number of strokes: 1300/min
- Flow: 20 l/min
- Energia udaru: 85 J
A hydraulic demolition hammer is a hand-held breaker with no engine of its own. Hoses feed it oil from a separate power pack, typically at around 100-160 bar and a flow of 18-30 l/min. That layout lets a tool weighing roughly 15-30 kg deliver more energy per blow than an electric breaker of similar size, and keeps it running through a full shift without overheating or cooling-down breaks.
A hand-held hydraulic breaker is a different machine from the boom-mounted hammer carried by an excavator: the operator holds it, so it reaches trenches, shafts, suspended floors, basements and building interiors where no carrier can go. Nothing burns at the working point, which makes it usable indoors and in tunnels where petrol demolition hammers are ruled out. At NORWIT.PL we supply Altrad Belle hydraulic breakers together with matching hydraulic power packs and tooling. Below we explain how to match impact energy, steels and supply parameters.
Hand-held hydraulic breaker versus excavator-mounted hammer
The phrase "hydraulic hammer" covers two classes of equipment. A boom-mounted breaker weighs from a few hundred kilograms to several tonnes. Everything here is a hand-held demolition hammer of about 15-30 kg, fed with oil through two hoses with quick-release couplings. It goes where a carrier cannot - trenches, shafts, interiors - leaving the power pack outside, 10-30 m away.
Hydraulic, petrol or electric - comparing the drive types
The drive decides where a breaker works and for how long. The figures below are typical ranges for the class, not specifications of one model.
| Feature | Hydraulic breaker (hand-held) | Petrol demolition hammer | Electric SDS-MAX breaker |
|---|---|---|---|
| Energy source | oil from a power pack, 100-160 bar and 18-30 l/min | integral 2-stroke engine | 230 V mains, about 1.5-2 kW |
| Impact energy | around 40-70 J | around 40-70 J | about 10-25 J |
| Work in enclosed spaces | yes, no exhaust at the tool | no | yes |
| Continuous operation | yes | yes, with refuelling stops | with cooling breaks |
The power unit is chosen separately, against the flow and pressure on the tool's data sheet - see hydraulic hammer power packs.
Altrad Belle hydraulic breakers and choosing the right steel
This category is built mainly around hand-held breakers from Altrad Belle, including BHB-series units built for that maker's compact power packs, so breaker, pack and hoses form a matched circuit. Typical jobs are strip-outs inside buildings, breaking in trenches, openings for service connections and breaking out concrete footings.
Moil points, flat chisels and clay spades mostly fit a hexagonal 32 x 160 mm shank, as used by steels in our demolition hammers section. Smaller hand tools sit under hammers, pullers and adjusters.
Frequently asked questions about hydraulic demolition hammers
What is the difference between a hand-held hydraulic breaker and an excavator hammer?
A hand-held hydraulic breaker weighs roughly 15-30 kg and is carried by the operator, while a boom-mounted hammer weighs from a few hundred kilograms to several tonnes on an excavator boom. The hand-held tool draws oil from a separate power pack at 100-160 bar and 18-30 l/min; the excavator hammer runs off the carrier's hydraulics. Being carried, it reaches trenches, shafts and interiors, and its 40-70 J per blow suits slabs, footings and concrete walls.
Will a hydraulic breaker run without a power pack?
A hydraulic breaker has no engine of its own and needs an external oil supply - a power pack, or a machine's hydraulics with sufficient output. Typical hand-held models call for 18-30 l/min at 100-160 bar, and hoses of 10-30 m keep the pack clear of the work. For a self-contained tool with a built-in engine see petrol demolition hammers; supply units are listed under hydraulic hammer power packs.
Should a concrete floor be broken with a moil point or a flat chisel?
The steel depends on whether the layer must be shattered or lifted off its base. Slabs of 10-20 cm are broken with a moil point held at 15-30 degrees to the surface and started from an edge or a joint; at around 45-60 J the tool flakes material away instead of drilling a hole. Screeds of 3-8 cm come off with a flat chisel worked almost parallel to the floor, so the blade travels under the layer. Reinforced concrete and strip footings call for the heaviest hand-held tools, around 60-70 J, with exposed bars cut separately.
Can a hand-held breaker be run off the hydraulics of an excavator or loader?
Feeding a breaker from a machine works only where flow and pressure match the tool's data sheet. A hand-held breaker takes 18-30 l/min at 100-160 bar, while an excavator's auxiliary circuit usually delivers more oil at around 200-250 bar, so a valve limiting flow and pressure has to sit between the two. The return line must reach the tank with little resistance: back pressure heats the oil and shortens seal life. Without such a circuit, a separate power pack sized to the breaker is the simpler route.
Why buy a hydraulic demolition hammer at NORWIT.PL
We specify the breaker together with its power supply, so you receive a working circuit, not a bare tool: flow and pressure are matched, and the order comes with hoses, couplings and steels. Our Altrad Belle range is backed by wear parts and service. Order online - we ship throughout Poland.










