Paint Sprayer Accessories

Paint sprayer accessories — tips, filters, hoses and spray guns

A paint sprayer applies coating by the airless method: the pump pressurises material to around 150–230 bar and forces it through a tip that breaks the stream into an even mist. The quality and durability of this process depend not only on the pump itself but also on the wear parts — the tip, filter, high-pressure hose and spray gun. These are the components that wear out fastest, and they decide whether the finish comes out even or paint goes to waste.

At NORWIT.PL we match accessories primarily to Titan and Wagner sprayers — from standard tips to long-life tungsten carbide versions, inlet and gun filters, high-pressure hoses in several lengths, and service kits with seals. The range is completed by IPC parts and other compatible components. You can browse the full equipment range on the Titan and Wagner brand page, and find the parent category under painting and plastering. Below we explain how to match tip size, filter mesh and hose to the material, plus the signs that tell you when to replace a part.

Types of paint sprayer accessories

Airless spraying accessories fall into several functional groups, each covering a different stage of the sprayer's work, from drawing in paint to atomising it onto the surface. The right choice depends on the sprayer model (Titan, Wagner or another) and the type of material being sprayed.

The range also includes specialist tips, for example for Titan road marking machines used in horizontal line marking, not just standard wall sprayers. If you are after the equipment itself rather than parts, check out membrane paint sprayers, piston paint sprayers and spackling machines for machine-applied compounds.

Choosing tip size and filter mesh for the material

Film thickness and spray width are governed by the tip. Its size is given in thousandths of an inch — the first digits set the angle (fan width) and the last two the orifice (output). Thinner materials need a smaller orifice, thicker ones a larger one. Filter mesh is chosen the same way: it must be finer than the tip orifice, otherwise contamination passes through the filter and clogs the tip.

The right tip and filter mesh limit overspray and paint waste, while also protecting the pump from premature wear of the ball valves. Tungsten carbide tips last longer than standard carbon-steel ones and hold up better with abrasive materials, such as paints containing mineral filler.

Filters, hoses and spray guns — what to check

The inlet filter (also called a suction filter) fits on the end of the hose submerged in a paint bucket or the sprayer's tank, and stops larger contaminants before they reach the pump. The gun filter sits closer to the tip and has a finer mesh — its job is to catch whatever got past the inlet filter. A high-pressure hose carries paint at pressures up to 230 bar and typically comes in lengths of 7.5 m, 15 m and 30 m — a longer hose makes work at height and on façades easier, but slightly lowers pressure at the tip.

The spray gun is the part the operator holds for an entire shift, so what matters is not just valve tightness but also weight and how easily the tip can be swapped without dismantling the whole head. A trigger lock (safety catch) is a mandatory feature — it prevents an accidental discharge of pressurised material, which at 230 bar can pierce skin.

Titan, Wagner or IPC — accessory compatibility

Titan and Wagner belong to one manufacturing group, and many wear parts — tips in the common thread standard, filters and high-pressure hoses — fit between models of both brands. That does not mean full universality, though: hose-coupling and tip-seat thread diameters differ between series (for example between compact finishing models and heavy PowrTwin or HeavyCoat units), so when ordering parts it is worth giving the sprayer model, not just the brand.

IPC accessories and other compatible components in the NORWIT.PL range fill gaps where the genuine Titan or Wagner part has a longer lead time — provided thread and working pressure match the specific sprayer. If you are unsure about fit, the safest option is to order through the contact form and give the equipment's model and serial number.

When to replace worn accessories

A typical airless tip handles around 200–500 litres of pumped paint with water-based materials, and tungsten carbide versions up to 1000 litres when working with primers and thicker paints. Signs of wear include a drop in spray pressure, a widened orifice (visible as an uneven, blurred fan) and higher paint consumption over the same surface. A filter needs replacing once you see contamination built up inside it, or when the pump clearly loses suction despite the material being correctly thinned.

A high-pressure hose under normal use typically lasts 2–3 working seasons; it must be replaced immediately if there is a visible crack, bulge or leak at the coupling, because working with a damaged hose at pressures up to 230 bar carries a real risk of injury if it bursts. Pump seals (O-rings, cup seals) are replaced preventively once a season, or when paint starts leaking from under the pump housing.

Frequently asked questions about paint sprayer accessories

Why buy paint sprayer accessories at NORWIT.PL

We match tips, filters, high-pressure hoses and spray guns primarily to Titan and Wagner sprayers, completing the range with compatible IPC parts. We advise on tip size and filter mesh selection for a specific material — from lacquers to spackling compounds — and flag when to replace a worn part before it affects finish quality. These accessories complement the equipment ranges in membrane, piston and spackling sprayer categories, as well as Titan road marking machines. You will find the parent category under painting and plastering. We fulfil orders online, with nationwide shipping.