Vacuum Cleaner Accessories

Industrial vacuum cleaner accessories are the filters, suction hoses, nozzles, bags and adapters that match a vacuum to a specific job on site. A filter of class L, M or H under EN 60335-2-69 sets how fine and hazardous a dust the vacuum can safely capture, a typically 50 mm hose carries debris to the tank, and an adapter connects the vacuum directly to a wall chaser, grinder or milling machine. Without them, the vacuum loses tightness and clogs faster.

An adapter for a wall chaser or grinder is chosen to match the connector diameter of both machines — across Husqvarna, IPC and Toolsa accessories the standard is a 50 mm hose, sized to fit a typical dust shroud. Smaller tools sometimes have narrower connectors, so measure the inlet diameter before buying. The NORWIT.PL range includes an adapter compatible with wall chasers such as Tyrolit models. A poorly matched adapter leaks and cuts suction power by several tens of percent.

At NORWIT.PL we offer industrial vacuum cleaner accessories primarily under the IPC, Toolsa and Husqvarna Construction brands, complemented by another leading brand of professional dust extraction equipment. These are filters, hoses, nozzles, bags and adapters matched to single-phase 230 V vacuums and three-phase 400/415 V turbines from these makers — we treat each brand as a system: a vacuum plus a full set of consumable parts.

Price depends on the type of accessory and the brand. A simple nozzle or a 50 mm hose usually costs less than an H13 HEPA filter (capturing 99.95% of 0.3 µm particles) or a pre-separator such as the Husqvarna C 3000, 37 l capacity. Current prices are on individual product pages. Orders are processed online at NORWIT.PL.

Household accessories are designed for domestic dust and short, occasional use, with no dust classification. Industrial and construction accessories must withstand continuous S1-duty operation and contact with concrete and plaster dust, so they carry a filtration class of L, M or H under EN 60335-2-69 and use thicker, abrasion-resistant media — an H13 HEPA filter here captures 99.95% of 0.3 µm particles, a level household accessories usually lack entirely.

Compatibility depends on connector diameter — IPC, Toolsa and Husqvarna Construction accessories largely share the same 50 mm hose standard, so a hose or nozzle from one brand often fits a vacuum from another. Filters and pre-separators are matched to a specific housing, so interchangeability is limited. Tell us your vacuum model before buying — we will advise which IPC accessory fits.

A filter is a consumable part replaced as it fills up, not on a fixed schedule — with daily use, check it every few days and replace it once suction power drops or clogging reaches around 80% of the filtration area. A pre-separator, such as the Husqvarna C 3000 with a 37 l capacity, extends the life of the main filter because it traps coarser debris before it reaches the class L, M or H filter.

A wall-chaser adapter must be matched to the connector diameter of both your vacuum and the tool — the standard hose diameter across Husqvarna, IPC and Toolsa accessories is 50 mm, but some wall chasers, such as certain Tyrolit models, use their own connector needing a dedicated adapter. A universal adapter does not always keep the system fully airtight, so state the vacuum and tool model when ordering and have the choice confirmed with NORWIT.PL.