-
Concrete
-
- Concreting
- Concrete Vibrators
- Complete 230 V Mechanical Vibrators
- Vibrator Heads
- Vibrator Shafts
- Vibrator Motors
- Concrete Vibrators 42 V | 200 Hz
- Mechanical Vibrators 230 V
- 42 V | 200 Hz Head and Shaft
- 230 V Concrete Vibrators
- Vibrators With Built-In 230 V | 200 Hz Converter
- 42 V | 200 Hz Converters
- Combustion Vibrators
- Pneumatic Vibrators
- External Vibrators
- Power Trowels
- Vibratory Screeds
- Concrete Hand Tools
- Concrete Vibrators
-
-
-
-
-
- Walk-Behind Combustion Power Trowels
-
-
-
Heating and cooling
-
-
-
- Cooling and ventilation
-
-
- cooling
-
-
-
Generators
-
-
-
-
- Inverter Generators
-
-
-
Earthworks
-
-
-
-
-
- Tamping rammers – jumping jacks
-
-
-
Industrial vacuums
-
-
- Cleaning and accessories
-
-
- Industrial vacuum cleaners
-
-
-
Finishing
-
-
-
- Bestseller
-
-
-
Pumps
-
-
-
-
- Bestseller
-
-
-
Measurement
-
-
-
-
-
-
-
- Bestseller
-
-
-
BLOG & Tips
-
Promotions
1 / 4
Toolsa · Cat. no. TAPE-300-zestaw
Toolsa Flexible Heater Ducting ⌀300 mm × 10 m with Hose Clamp (TA-DV50)
- Toolsa TA-DV50
- 10 m
- Ø 300 mm
zł1,220.00 net
zł1,500.60 gross
Leasing for businesses
from zł40.74 net / month
Indicative calculation · you set the terms
ING leasing is not available for this amount — call us and we will arrange financing +48 732 081 091
In stock
28 pcs in stock
Same-day dispatch
order by 13:00
Arrives next day
on working days
Prefer to talk? +48 732 081 091
- 25 years on the market
- Own warehouse 1200 m²
- Returns up to 14 days
- Free delivery over PLN 3,000
Accessories
Description
Toolsa ⌀300 mm × 10 m flexible ducting with hose clamp for the TA-DV50 heater
This Toolsa set combines a ⌀300 mm flexible duct, 10 m long, with a hose clamp for fixing it to the warm-air outlet. The duct carries heated air from the heater to the area that needs it. It fits the Toolsa TA-DV50 indirect diesel heater rated at 50 kW.
50 kW of heat where it is needed
The TA-DV50 heats volumes of up to 800 m³, but without ducting the airflow disperses just in front of the outlet. A 10 m duct directs warm air into a tent, to the far end of a hall, up under the roof or into a neighbouring room. The wire-spiral duct can be routed in curves around obstacles.
Hose clamp included
The clamp keeps the end of the duct on the heater's outlet collar throughout the job, even when the heater is moved or the duct is knocked. Hot air keeps flowing down the duct instead of escaping at the joint. Both parts come in one set.
300 mm for the TA-DV50 only
The 300 mm diameter matches the warm-air outlet of the Toolsa TA-DV50, which uses 4.6 l of fuel per hour at 50 kW. The smaller TA-DV20 and TA-DV30 have a 250 mm outlet and take the set with a ⌀250 mm duct.
A duct is not a flue
The flexible duct connects to the air outlet and distributes warm air. Exhaust from the TA-DV50 leaves through a separate 110 mm flue: the flue pipe, a 90° elbow and a rain cap. These two systems must never be swapped.
Buy the TA-DV50 heater duct set at NORWIT.PL
Order the ⌀300 mm flexible duct with hose clamp online at NORWIT.PL together with your heater or on its own. See also our other heater accessories and the full Toolsa range.
Technical data
- Cat. no.
- TAPE-300-zestaw
- Length
- 10 m
- Set contents
- przewód elastyczny ⌀300 mm × 10 m | opaska zaciskowa
- Kompatybilność
- Toolsa TA-DV50
- Średnica
- 300 mm
In the box
1 pcsToolsa Flexible Heater Ducting ⌀300 mm × 10 m with Hose Clamp (TA-DV50)
1 pcsToolsa ⌀300 mm × 10 m flexible duct
1 pcsHose clamp
Questions and answers
Which heater does the Toolsa ⌀300 mm flexible duct fit?
The Toolsa ⌀300 mm × 10 m flexible duct with hose clamp fits the Toolsa TA-DV50 indirect diesel heater rated at 50 kW. The duct diameter matches its warm-air outlet. The smaller TA-DV20 (20 kW) and TA-DV30 (30 kW) heaters have a 250 mm outlet and take the set with a ⌀250 mm duct.
What is included in the ⌀300 mm flexible duct set?
The Toolsa set contains a flexible duct 300 mm in diameter and 10 m long, and a hose clamp that fixes it to the heater's outlet collar. The clamp stops the duct slipping off during work, so no heat escapes at the joint. The set is made for the TA-DV50 heater rated at 50 kW.
Which flexible duct should I choose for a Toolsa heater?
A flexible duct for a Toolsa heater is chosen by the diameter of the warm-air outlet. The TA-DV20 (20 kW) and TA-DV30 (30 kW) take the set with a ⌀250 mm × 10 m duct, while the TA-DV50 (50 kW) takes the set with a ⌀300 mm × 10 m duct. Both sets include a hose clamp for fixing the duct.
How is a flexible duct different from a heater flue?
A flexible duct and a flue connect to two different outlets on an indirect diesel heater. The ⌀300 mm duct distributes warm air from the air outlet up to 10 m away. The 110 mm flue, made up of a flue pipe, a 90° elbow and a rain cap, takes exhaust outside the building. The clamp in the set is for the duct only.
